Kia Rio 2007 Manual Download

Page: 209 / 256

7 21

Maintenance

Filter replacement

1. With the glove box open, remove the

stoppers on both sides and allow the
glove box to hang freely on the hinges.

2. Remove the climate control air filter

cover by pressing the clips on both
sides of the cover.

3. Replace the climate control air filter.
4. Reassemble in the reverse order of

disassembly.

✽

NOTICE

When replacing the climate control air
filter install it according to the “AIR
FLOW

” and “UP

” identification

marks. Otherwise, the system may pro-
duce noise and the effectiveness of the
filter may be reduced.

1JBA7013

1JBA7016

1JBA7014

1JBA7015

Summary of Contents for Rio 2007

































































































































































































































































Search results

Summary of Contents for Rio 2007

Reviews:

Related manuals for Rio 2007

Brands by name

Popular brands

Kia Rio 2007, Manual

Search results

Summary of Contents for Rio 2007

Reviews:

Related manuals for Rio 2007

Brands by name

Popular brands