manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

Knowing your vehicle

72

3

Electric remote control 
(if equipped)

The electric remote control mirror switch
allows you to adjust the position of the
left and right outside rearview mirrors. To
adjust the position of either mirror, move
the lever (1) to R or L to select the right
side mirror or the left side mirror, then
press a corresponding point ( ) on the
mirror adjustment control to position the
selected mirror up, down, left or right.
After adjustment, put the lever into neu-
tral position to prevent the inadvertent
adjustment.

✽

✽

NOTICE

• The mirrors stop moving when they

reach the maximum adjusting angles,
but the motor continues to operate
while the switch is depressed. Do not
depress the switch longer than neces-
sary, the motor may be damaged.

• Do not attempt to adjust the outside

rearview mirror by hands. Doing so
may damage the parts.

Folding the outside rearview 
mirror

To fold outside rearview mirror, grasp the
housing of mirror and then fold it back,
toward the rear of the vehicle.

1JBA3086

1JBA3087

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

iDataLink maestro Rr Install Manual preview
maestro Rr
Brand: iDataLink Pages: 106
Vauxhall Ampera Owner'S Manual preview
Ampera
Brand: Vauxhall Pages: 199
Napoli NPL-TV 7874 DIGITAL Instruction Manual preview
NPL-TV 7874 DIGITAL
Brand: Napoli Pages: 20
TATA Motors Tata Indigo Diesel Owner'S Manual & Service Book preview
Tata Indigo Diesel
Brand: TATA Motors Pages: 190
Safe Fleet Prime Design HBR-E-FT33B Assembly Instructions Manual preview
Prime Design HBR-E-FT33B
Brand: Safe Fleet Pages: 12
Calitop Calispace Ocean 80 Assembly Instructions preview
Calispace Ocean 80
Brand: Calitop Pages: 5
Sears 580.32601 Owner'S Manual preview
580.32601
Brand: Sears Pages: 41
Toyota Sienna 2021 Manual preview
Sienna 2021
Brand: Toyota Pages: 600
Improved Racing E5G-601 Instructions Manual preview
E5G-601
Brand: Improved Racing Pages: 17
Volvo 1989 780 Owner'S Manual preview
1989 780
Brand: Volvo Pages: 123
Oldsmobile Bravada 1997 Owner'S Manual preview
Bravada 1997
Brand: Oldsmobile Pages: 358
Scosche MAGICGRIP MGQDWD-CPO Instructions Manual preview
MAGICGRIP MGQDWD-CPO
Brand: Scosche Pages: 12
Motoalliance Denali MA11737 Manual preview
Denali MA11737
Brand: Motoalliance Pages: 4
Great day UVFR751 Instructions For Installation And Use preview
UVFR751
Brand: Great day Pages: 5
Honda 2000 RL Owner'S Manual preview
2000 RL
Brand: Honda Pages: 330
Goobay KFZ 112 Quick Start Manual preview
KFZ 112
Brand: Goobay Pages: 2
Roadefend RDT401P Instruction Book preview
RDT401P
Brand: Roadefend Pages: 15
HAKR HV1160 Quick Start Manual preview
HV1160
Brand: HAKR Pages: 2

Brands by name

Popular brands

Load more brands