manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

Knowing your vehicle

50

3

• The “PASSENGER AIR BAG OFF”

indicator illuminates after the ignition
key is turned to the “ON” position or
after the engine is started. If the front
passenger's seat is occupied by a very
small person, the “PASSENGER AIR
BAG OFF” indicator will remain illumi-
nated and the front passenger air bag
will not deploy in frontal crashes. If the
front passenger’s seat is occupied by
an adult size person seated properly,
the “PASSENGER AIR BAG OFF” indi-
cator will turn off after approximately 4
seconds and the front passenger's air
bag will deploy in frontal crashes.

• If the front passenger's seat is unoccu-

pied, the “PASSENGER AIR BAG
OFF” indicator will turn on, and the
front passenger's air bag will not
deploy in frontal crashes.

• If the “PASSENGER AIR BAG OFF”

indicator illuminates, the front passen-
ger’s air bag will not deploy in frontal
crashes.

• If the front passenger’s seat is occu-

pied by an adult size person seated
properly, the “PASSENGER AIR BAG
OFF” indicator is not illuminated and
the front passenger’s air bag will
deploy in frontal crashes.

Condition detected by

the occupant classifi-

cation system

1. Adult *

1

2. Child *

2

3. Unoccupied 

Off

On

On

Off

Off

Off

Activated

Deactivated

Deactivated

"PASSENGER AIR

BAG OFF" indicator light

Air bag warning light

Front passenger air

bag

Indicator/Warning light

Devices

*

1

The system judges a person of adult size as an adult. When a smaller adult sits in

the front passenger seat, the system may recognize him/her as a child depending
on his/her physique and sitting posture.

*

2

When a larger child who has outgrown a child restraint system sits in the front pas-

senger seat, the system may recognize him/her as an adult depending on his/her
physique sitting posture, or objects in the lap of the occupant.

Condition and operation in the front passenger occupant 
classification system

CAUTION

If the "PASSENGER AIR BAG OFF" indicator illuminates or blinks continu-
ously when a person of adult size sits in the front passenger's seat, it could
be because that person isn't sitting properly in the seat. If this happens, turn
the vehicle off, make sure the seat back is not reclined, have the passenger
center themselves on the seat cushion, with legs comfortably extended, and
the safety belt properly positioned. Restart the vehicle and have the person
remain in this position long enough to allow the system to detect the person
and activate the passenger air bag.

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

Laser 4832 Manual preview
4832
Brand: Laser Pages: 8
GOgroove SMARTmini AUX Operating Manual preview
SMARTmini AUX
Brand: GOgroove Pages: 9
Conrad 75 16 30 Operating Instructions Manual preview
75 16 30
Brand: Conrad Pages: 26
Ford 2003 Thunderbird Owner'S Manual preview
2003 Thunderbird
Brand: Ford Pages: 200
Paccar DAF POWERCHOICE 250A Installation Manual preview
DAF POWERCHOICE 250A
Brand: Paccar Pages: 20
Jacobsen Cushman Turf Truckster Parts & Maintenance Manual preview
Cushman Turf Truckster
Brand: Jacobsen Pages: 210
AMP Research 75135-01A Installation Manual preview
75135-01A
Brand: AMP Research Pages: 12
Havis-Shields Half Size Trunk Box Organizer C-TBO-CV Installation Instructions preview
Half Size Trunk Box Organizer C-TBO-CV
Brand: Havis-Shields Pages: 1
Volvo S60 2012 Quick Manual preview
S60 2012
Brand: Volvo Pages: 8
Mercedes-Benz AMG E-Class Supplement Manual preview
AMG E-Class
Brand: Mercedes-Benz Pages: 54
Honda 2010 Civic Sedan Owner'S Manual preview
2010 Civic Sedan
Brand: Honda Pages: 390
Volvo 1989 780 Owner'S Manual preview
1989 780
Brand: Volvo Pages: 123
Classic AutoAir Mustang 1969 Installation Manual preview
Mustang 1969
Brand: Classic AutoAir Pages: 44
Bilstein E4-WM5-Y479A00 Mounting Instruction preview
E4-WM5-Y479A00
Brand: Bilstein Pages: 7
Car-Interface CI-RL4-MM-NP Manual preview
CI-RL4-MM-NP
Brand: Car-Interface Pages: 23
GMC 2008 Savana Van Owner'S Manual preview
2008 Savana Van
Brand: GMC Pages: 402
Xforce PR-104 User Manual preview
PR-104
Brand: Xforce Pages: 11
Car-Interface CI-RL4-R40 Manual preview
CI-RL4-R40
Brand: Car-Interface Pages: 25

Brands by name

Popular brands

Load more brands