manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

4 9

Driving your vehicle

Shift lock system

For your safety, the Automatic Transaxle
has a shift lock system which prevents
shifting the transaxle out of P (Park)
unless the brake pedal is depressed.
To shift the transaxle out of P (Park):
1. Depress and hold the brake pedal.
2. Start the engine or turn the ignition to

the ON position.

3. Depress the lock release button and

move the shift lever.

If the brake pedal is repeatedly
depressed and released with the shift
lever in the P (Park) position, a chattering
sound near the shift lever may be heard.
This is a normal condition.

Ignition key interlock system

The ignition key cannot be removed
unless the shift lever is in the P (Park)
position. If the ignition switch is in any
other position, the key cannot be
removed.

BRAKE SYSTEM 

Power brakes  

Your vehicle has power-assisted brakes
that adjust automatically through normal
usage.
In the event that the power-assisted
brakes lose power because of a stalled
engine or some other reason, you can
still stop your vehicle by applying greater
force to the brake pedal than you nor-
mally would. The stopping distance, how-
ever, will be longer.
When the engine is not running, the
reserve brake power is partially depleted
each time the brake pedal is applied. Do
not pump the brake pedal when the
power assist has been interrupted.
Pump the brake pedal only when neces-
sary to maintain steering control on slip-
pery surfaces.

In the event of brake failure 

If service brakes fail to operate while the
vehicle is in motion, you can make an
emergency stop with the parking brake.
The stopping distance, however, will be
much greater than normal.

WARNING

- Parking brake

Pulling the parking brake while the
vehicle is moving at normal speeds
can cause a sudden loss of control
of the vehicle. If you must use the
parking brake to stop the vehicle,
use great caution in applying the
brake.

WARNING - 

Brakes

• Do not drive with your foot rest-

ing on the brake pedal. This will
create abnormal high brake tem-
peratures, excessive brake lining
and pad wear, and increased
stopping distances.

• When descending a long or steep

hill, shift to a lower gear and
avoid continuous application of
the brakes. Continuous brake
application will cause the brakes
to overheat and could result in a
temporary loss of braking per-
formance.

(Continued)

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

Mercedes-Benz AMG E-Class Supplement Manual preview
AMG E-Class
Brand: Mercedes-Benz Pages: 54
ULTIMATE SPEED 304669 Instructions For Use And Safety Manuallines preview
304669
Brand: ULTIMATE SPEED Pages: 50
Road Ranger H392 Installation Manual preview
H392
Brand: Road Ranger Pages: 22
Thule PORTAGE 819 Instructions Manual preview
PORTAGE 819
Brand: Thule Pages: 12
Sagem MyCK100 User Manual preview
MyCK100
Brand: Sagem Pages: 10
Weltmann KFZ-Teile 9B500016 Fitting Instructions Manual preview
9B500016
Brand: Weltmann KFZ-Teile Pages: 12
r.LiNK RL2-MMI3G-GW Manual preview
RL2-MMI3G-GW
Brand: r.LiNK Pages: 21
Thule 145012 Quick Start Manual preview
145012
Brand: Thule Pages: 2
Volvo 30661683 Installation Instructions, Accessories preview
30661683
Brand: Volvo Pages: 18
STO N SHO SNS 297 Installation Procedures Manual preview
SNS 297
Brand: STO N SHO Pages: 7
Haltech PLATINUM HT051202 Quick Start Manual preview
PLATINUM HT051202
Brand: Haltech Pages: 10
Camcar 40072 Mounting Instructions preview
40072
Brand: Camcar Pages: 2
LetsGoAero V2 Two-Bike Carrier User Manual preview
V2 Two-Bike Carrier
Brand: LetsGoAero Pages: 2
Safe Fleet Prime Design FBM-1027 Assembly Instructions Manual preview
Prime Design FBM-1027
Brand: Safe Fleet Pages: 8
AdvanceTec Verizon V860 - BARRAGE User Manual preview
Verizon V860 - BARRAGE
Brand: AdvanceTec Pages: 8
Sune Technology A4L-1106-003 Specifications & Installation preview
A4L-1106-003
Brand: Sune Technology Pages: 24
Thule RMC User Manual preview
RMC
Brand: Thule Pages: 16
Toshiba TD Series Product Manual preview
TD Series
Brand: Toshiba Pages: 2

Brands by name

Popular brands

Load more brands