manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

Maintenance

20

7

Replace the element according to the
Scheduled Maintenance Section.
If the vehicle is operated in extremely
dusty or sandy areas, replace the ele-
ment more often than the usual recom-
mended intervals. (Refer to Schedule 2 -
Severe Maintenance in this section.)

✽

✽

NOTICE - 

Engine

• Do not drive with the air cleaner ele-

ment removed; this will result in
excessive engine wear.

• When removing the air cleaner ele-

ment, be careful that dust or dirt does
not enter the air intake, or damage
may result. 

The climate control  air filter installed
behind the glove box filters the dust or
other pollutants that come into the vehi-
cle from the outside through the heating
and air conditioning system. If dust or
other pollutants accumulate in the filter
over a period of time, the air flow from the
air vents may decrease, resulting in
moisture accumulation on the inside of
the windshield even when the outside
(fresh) are position is selected. If this
happens, have the climate control  air fil-
ter replaced by an Authorized Kia Dealer.

The climate control  air filter should be
replaced every 10,000 miles (15,000
km). If the vehicle is operated in the
severely air-polluted cities or on dusty
rough roads for a long period, it should
be inspected more frequently and
replaced earlier. When you try to replace
the climate control  air filter by owner
maintenance, replace it performing the
following procedure, and in this case, be
careful to avoid damaging other compo-
nents.

CAUTION - 

Engine

Operating the engine without the air
cleaner may result in poor perform-
ance, emission control malfunction,
and/or engine damage.

CLIMATE CONTROL AIR FILTER (IF EQUIPPED)

1LDA5047

Outside air

Recirculated

air

Climate control
air filter

Blower

Evaporator
core

Heater core

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

Cequent 10417 Instruction Sheets preview
10417
Brand: Cequent Pages: 9
Paxton Automotive Novi Owner'S Installation Manual preview
Novi
Brand: Paxton Automotive Pages: 85
Thule 1489 Instructions Manual preview
1489
Brand: Thule Pages: 8
EUFAB 12015 Manual preview
12015
Brand: EUFAB Pages: 12
Chevrolet 2013 Spark Specifications preview
2013 Spark
Brand: Chevrolet Pages: 2
Hyundai Santa Fe 2006 Owner'S Manual preview
Santa Fe 2006
Brand: Hyundai Pages: 280
tams elektronik FCS-4 Manual preview
FCS-4
Brand: tams elektronik Pages: 19
FVC Sprinter Side Ladder Installation Manual preview
Sprinter Side Ladder
Brand: FVC Pages: 8
Whispbar K835W Fitting Instructions For Basic Carrier preview
K835W
Brand: Whispbar Pages: 63
Cadillac 2004 Seville Customer Convenience/Personalization Manual preview
2004 Seville
Brand: Cadillac Pages: 20
Pyle PLRD146 User Manual preview
PLRD146
Brand: Pyle Pages: 8
Lexus rx450h 2015 Owner'S Manual preview
rx450h 2015
Brand: Lexus Pages: 878
Buick Enclave Owner'S Manual preview
Enclave
Brand: Buick Pages: 394
Hama 00046080 Instructions For Use preview
00046080
Brand: Hama Pages: 2
Fortin Electronic Systems EVO-CAN Suggested Wiring Configuration preview
EVO-CAN
Brand: Fortin Electronic Systems Pages: 5
DiscountRamps BC-8407-2 Instructions preview
BC-8407-2
Brand: DiscountRamps Pages: 2
NavLinkz RL1-MMI3G Manual preview
RL1-MMI3G
Brand: NavLinkz Pages: 17
BMW 84 64 0 025 810 Installation Instructions Manual preview
84 64 0 025 810
Brand: BMW Pages: 25

Brands by name

Popular brands

Load more brands