Jetter JC-120MC, User Manual

Page: 583 / 634

Jetter AG 583
JC-120MC Automatic copying of controller data
File contents
The log file is a plain text file. By making an entry into the command file, you
define whether a log file is to be created or whether the device is to append
the entries to an existing log file.
JetControl AutoCopy log file 07.11.2008 09:14:09
1: Ok - FileCopy /SD/OS/JC-340_1.04.0.00.os
/System/OS/op_system.os (345740 byte)
2: Ok - FileCopy /SD/OS/JX3-AO4_1.01.0.00.os
/System/JX3-Module02/OS/system.os
(16832 byte)
3: Warning - DirCreate /app
4: Ok - DirCreate /app/userprogtest
5: Ok - FileCopy /SD/UserProgs/start.ini
/app/start.ini (63 byte)
6: Ok - FileCopy /SD/UserProgs/userprogtest.es3
/app/userprogtest/userprogtest.es3
(169 byte)
7: Error - DaFileRead /SD/UserData/MyTestData.da
Command statistics:
Total : 7
Ok : 5
Warning: 1
Error : 1
When for each executed AutoCopy function a section is appended to an
existing log file, the log file consists of three elements:
 The header contains date and time

The following block contains information on the executed commands.
 Finally, it contains short statistics on command processing.
In the above example an error occurs when trying to create the directory
/app
as this directory already exists. The device enters this error as a warning.
When the device reads the DA file, an error also occurs. The device enters
this error into the log file.
Introduction
Example
Description