Jetter JC-120MC, User Manual

Page: 84 / 634

84 Jetter AG
4 Mechanical and electrical installation
Setting the IP address via configuration file and DIP switch
You can set the IP address of the JC-120MC via the configuration file
config.ini and the DIP switch sliders. To this end, set the three upper bytes of
the IP address in the config.ini file, and the lower byte using the DIP switch
sliders.
Set the upper three bytes of the IP address of the JC-120MC in the
configuration file config.ini file.
[IP]
Address = aaa.bbb.ccc.1
...
Element Description
Address
Line for entering the upper 3 bytes of the IP address
aaa
First byte of IP address
bbb
Second byte of IP address
ccc
Third byte of IP address
1
Dummy entry, must have got value one.
The following DIP switch settings cause the JC-120MC to read out the
IP address from the file config.ini and the DIP switches:
ON
1 2 3 4 5 6 7 8 9 10 11 12
DIP switch IP address
1 2 3 4 5 6 7 8
OFF OFF OFF OFF OFF OFF OFF OFF Default IP address
ON
OFF OFF OFF OFF OFF OFF OFF aaa.bbb.ccc.1
OFF ON OFF OFF OFF OFF OFF OFF aaa.bbb.ccc.2
ON ON OFF OFF OFF OFF OFF OFF aaa.bbb.ccc.3
...
OFF ON ON ON ON ON ON ON aaa.bbb.ccc.254
ON ON ON ON ON ON ON ON
from config.ini
Introduction
Configuration file -
Setting the IP address
DIP switch settings