Jetter JC-120MC, User Manual

Page: 72 / 634

72 Jetter AG
4 Mechanical and electrical installation
Removing the JC-120MC from the DIN rail
To remove the JC-120MC from a rail to DIN EN 50022 proceed as follows:
Step Action
1 Remove power from the JX3 station.
2 Slide the controller to the left. By doing so, the backplane module is
disconnected from the JX3 peripheral modules.
3 Pull down the right DIN rail latch
using a flat-bladed screwdriver.
4
Swing the controller forward.
5 Remove the controller from the
DIN rail.
 Installing the JC-120MC on a DIN rail (see page 69)
 Replacing the controller (see page 70)
Removing
Related topics