Jetter JC-120MC, User Manual

Page: 447 / 634

Jetter AG 447
JC-120MC Programming
10.14 Sorting data
This chapter describes system function 50. This system function is used to
trigger the sorting algorithm provided by the operating system.
For sorting data in controller registers by their value.
The sort algorithm is provided by the operating system of the controller. The
data to be sorted are indirectly addressed through a descriptor using
parameter 1.
As of JetSym 5.0, system function 50 is outdated. Instead, apply JetSym STX
function QSort() .
The JetSym STX function QSort() has been described in detail in the online
help of JetSym.
Declaration of functions:
Function QSort(DataPtr: Int, ElementCnt: Int, ElementSize: Int,
SortOffset: Int, SortType: STXBASETYPE, SortMode: QSORTMODE): Int;
Introduction
Application
System function 50
JetSym STX function
QSort()