Jetter JC-120MC, User Manual

Page: 341 / 634

Jetter AG 341
JC-120MC Programming
During input, the following values are being displayed:
Step Description
1
The controller shows the suggested value. The formatting parameters are
used the same way as for displaying numerical values.
2 If ... ... then ...
... you press the key ENTER ,
... the controller takes over the
suggested value and completes
executing the instruction.
... you press another key that has
been used during input,
... the controller clears the
suggested value and has the value
resulting from the pressed key
displayed.
3
The input numerical value is displayed left-aligned in the input field, until
executing the instruction is completed or aborted.
Result : After finishing the input, the latest display remains on the screen.
Topic Page
STX instruction for the input of numerical values ....................................... 342
Device numbers .......................................................................................... 343
Cursor position ............................................................................................ 345
Setting the length of the input field ............................................................. 347
Setting the maximum number of decimal places ........................................ 348
Setting the suggested value ....................................................................... 349
Polling the number of decimal places ......................................................... 350
UserInput - Polling the status ..................................................................... 351
UserInput - Aborting the instruction ............................................................ 352
Displaying inputs
Contents