Jetter JC-120MC, User Manual

Page: 87 / 634

Jetter AG 87
JC-120MC Mechanical and electrical installation
Important note:
The EEPROM data on the backplane module allow for 100,000 write cycles.
We urgently recommend the following workflow:
First read out the value, then compare it. Only if the value has changed, start
writing.
Write to register 101299 to have the controller take the following steps:
 The controller creates a configuration file out of the values.
 It saves the configuration file to the backplane module as
/System/config.ini .

If you have entered comments and formatting details into this file, the
comments and formatting details will get lost during this process.
 The configuration memory (see page 75)
 Setting the IP address during runtime (see page 88)

Setting the IP address via configuration file
(see page 83)
 Setting the IP address via configuration file and DIP switch (see
page 84)
Effect
Related topics