Jetter JC-120MC, User Manual

Page: 453 / 634

Jetter AG 453
JC-120MC Programming
Supported commands - Class 1
read coils
Reading outputs
The output number within the JC-120MC is calculated as follows: Output
number specified in the command plus the content of register 272705 Output
Offset
.
read input discretes
Reading inputs
The input number within JC-120MC is calculated as follows: Input number
specified in the command plus the content of register 272704 Input Offset .
read input registers
Reading inputs blockwise in 16-bit words.
The starting register number within JC-120MC is calculated as follows:
Register number specified in the command plus the content of R 272702
Register Offset .
write coil
Enabling/disabling an individual output
The output number within the JC-120MC is calculated as follows: Output
number specified in the command plus the content of register 272705 Output
Offset
.
write single register
Entering values into the 16 least significant bits of a register
The starting register number within JC-120MC is calculated as follows:
Register number specified in the command plus the content of R 272702
Register Offset .
fc 1
fc 2
fc 4
fc 5
fc 6