Jetter JC-120MC, User Manual

Page: 319 / 634

Jetter AG 319
JC-120MC Programming
10.9.3 Configuring the screen size
This chapter gives a description on how the screen size of the HMI is
configured in the controller.
During the boot process the HMI logs in to the controller and transmits its
display size. This way, the controller is able to configure the size automatically.
Therefore, you do not have to configure the display size manually. But in some
cases this feature might make sense.
To ensure that the controller correctly executes the special functions Delete
Screen , and Delete to End of Line when displaying texts (DisplayText
instructions).
Topic Page
Configuring the screen size manually ........................................................ 320
Introduction
Why do I have to
configure the screen
size?
Why is the correct
screen size important?
Contents