Jetter JC-120MC, User Manual

Page: 575 / 634

Jetter AG 575
JC-120MC Automatic copying of controller data
Parameter value 5 Number of the last register or flag
Allowed values All valid numbers from the memory area of the
corresponding JC-120MC which are equal to or greater
than the value for First
Illegal values

Invalid numbers

Numbers less than First
In the event of an illegal
value
The controller stores only one value (First).
Example
[COMMAND_11]
Command = DaFileWrite
DaFile = /SD/MyTestData2.da
Append = 0
Type = Register
First = 1000000
Last = 1000000
[COMMAND_12]
Command = DaFileWrite
DaFile = /SD/MyTestData2.da
Append = 1
Type = Flag
First = 10
Last = 20
[COMMAND_13]
Command = DaFileWrite
DaFile = /SD/MyTestData2.da
Append = 1
Type = Register
First = 1000001
Last = 1000999
The following commands are available for access via network using FTP:
Command = FtpConnect
Function Establishing a connection to an FTP server
Parameter name 1 ServerAddr
Parameter value 1 IP address or name of FTP server
Allowed values 
IP address of the FTP server

Name which can be resolved through DNS
Illegal values

IP address other than that of the FTP server

Name which cannot be resolved
Parameter name 2 UserName
Parameter value 2 User name for logging on at the FTP server
Parameter name 3 Password
Parameter value 3 Password for logging on at the FTP server
In the case of a illegal
values
The controller does not establish the connection. It
enters the error into the log file.
Available commands for
access via FTP