Jetter JC-120MC, User Manual

Page: 406 / 634

406 Jetter AG
10 Programming
Values
2 ... 32 I/O module numbers in the case of JX2-I/O modules and
IP67 modules
70 ... 79 I/O module number in the case of CANopen® modules
Module register properties
Type of access Only value
0
can be entered
Value
0
lets you delete the entered value
Number of the slave module where the timeout has occurred
If during communication with a slave module a timeout occurs, the controller
enters the number of the slave module into this register. A timeout might occur
in the following cases:

Read/write access to module registers of a slave module
Values
2 ... 17 Slave module number
Module register properties
Type of access Only value 0 can be entered
Value 0 lets you delete the entered value
The following registers function as counters of various CAN errors that might
occur on the JX2 system bus.
Detailed knowledge of the Controller Area Network (CAN bus) is required.
Register Description
200002821 Write 1 to set the CAN error counters to 0
200002824 Counter for stuff errors
200002825 Counter for CRC errors
200002826 Counter for formal errors
200002827 Counter for acknowledge errors
200002828 Counter for bit errors
R 200002012
Register for error
counters