Jetter JC-120MC, User Manual

Page: 594 / 634

594 Jetter AG
12 OS update
OS update by means of JetSym
The programming tool JetSym offers an easy way to transfer an OS file to a
JX module connected to the JX2 or JX3 system bus of the controller.

An OS file for the JX module is available.

A UDP/IP and a TCP/IP connection between programming tool and
controller is possible.
The number of the IP port is set in the configuration memory as IP basic
port number for JetIP communication.

The operating system is running.
 The controller has initialized both the JX2 and JX3 system bus with the
connected JX modules without errors.
Note:
Make sure the controller and the JX modules remain energized.
To update the OS of a JX module, proceed as follows:
Step Action
1 Select in the JetSym menu Build the menu item Update OS. Alternative:
In the Advanced Configuration dialog of the Hardware Manager, click on
the button Update OS .
Result: A file selection dialog opens.
2 Select the new OS file here.
Ergebnis: In JetSym, a confirmation dialog opens.
3 Confirm by clicking Yes.
Ergebnis: JetSym opens an input box for entering the interface type and
module number.
4 Enter here the interface type (1 for the JX3 system bus; 2 for the
JX2 system bus) and the module number (2 ... 23).
Launch the OS upload by clicking the button
Update
.
5 Wait until the update process is completed.
6 If ... ... then ...
... you wish to update further JX3
modules, ...
proceed with step 1
... you do not wish to update any
other JX3 modules, ...
... reboot the controller to launch the
new operating system.
Introduction
Prerequisites
Updating the OS