Jetter JC-120MC, User Manual

Page: 369 / 634

Jetter AG 369
JC-120MC Programming
Configuring the monitor function
The following registers are for configuring the monitor functions.
Disabling/enabling monitor functions
This module register is bit-coded. These bits can be used to disable/enable
individual monitor functions. Keys are also mapped to flags with the monitor
function disabled.
Module register properties
Values 0 ... 255
Value after reset 255
Meaning of the individual bits
Bit 0
Taste [R]
0 =
Key [R] has no monitor function.
1 = Key [R] has got a monitor function.
Bit 1 Displaying the flag state
0 = Keys [R] and [I/O] without monitor function Display flag state
1 = Keys [R] and [I/O] with monitor function Display flag state
Bit 2 Displaying an output state
0 = Key
[I/O]
without monitor function
Display output state
1 =
Key [I/O] with monitor function Display output state
Bit 3 Displaying an input state
0 =
Key [I/O] without monitor function Display input state
1 = Key [I/O] with monitor function Display input state
Bit 4 Changing register contents
0 = Key [=] without monitor function Change register contents
1 = Key
[=]
with monitor function
Change register contents
Bit 5 Changing the flag state
0 =
Key [=] without monitor function Change flag state
1 = Key [=] with monitor function Change flag state
Bit 6 Changing an output state
0 = Key [=] without monitor function Change output state
1 = Key [=] with monitor function Change output state
Bit 7 Permanent indication of input state
0 = Key
[=]
without monitor function
1 =
Key [=] with monitor function
Introduction
MR 2818