25
SP
E
C
IF
IC
A
T
IO
N
S
phone: 1-800-854-3140 | 1-503-304-8899 fax: 1-800-366-7505 | 1-503-304-1899 www.jjamusements.com
TUBE SETUP
Carefully unfold the tube and lay it fl at on the boat box top.
Note: Boat hulls are normally packaged with
their correctly color-coordinated tube.
Fill the tube with a Super Tube fi ll adapter
(#00367) as shown in fi gures 1 & 2, a Super Tube pressure test
adapter/fi ller (#2-60-A0006) as shown in fi gures 3 & 4, or a
vacuum/blower (J&J #2-60-0124) as shown in fi gure 5.
Carefully infl ate the tube to the recommended 3 PSI.
Always use a low-pressure gauge, such as J&J #3-96-0024,
to accurately measure tube pressure.
NOTICE:
TUBES SHOULD BE FILLED COLD AS
AIR PRESSURE CHANGES WHEN HOT.
(See Super Tube Infl ation on page 2-14).
Aft er infl ating, make sure the valve is closed by
pushing the valve in and turning it clockwise.
Check the valve for leaks by applying a solution of soapy water.
If bubbles form, the valve needs to be tightened.
With the tube infl ated, insert Super Tube valve tightening tool
(J&J #2-60-0123).
Turn nut 1/8th turn.
Recheck with soapy water solution.
Repeat as needed until no bubbles form.
Fig. 1
Fig. 3
Fig. 2
Fig. 4
Fig. 5
Infl ate and defl ate boat tubes quickly with this 4hp
vacuum/blower! J&J# 2-60-0124
