phone: 1-800-854-3140 | 1-503-304-8899 fax: 1-800-366-7505 | 1-503-304-1899 www.jjamusements.com
6-5
DECAL REMOVAL AND INSTALLATION
Hold a squeegee in such a way that you will be
able to make easy, overlapping strokes.
Begin in the center and squeegee the entire
decal, working from the center to outer edges
to remove all air from under the decal.
REMOVAL
Use a hot air gun to heat the decal.
The heat is not for melting away the decal, but to
heat the adhesive enough to removal the decal.
Repeat until the decal is completely removed.
Apply a small amount of WD-40 to a clean cloth
(the cloth should be damp, but not soaked).
Wipe away the glue on the
fi
berglass
using the moistened cloth.
INSTALLATION
Clean the surface with a grease-cutting
liquid detergent and water.
Rinse with fresh water, then dry with a lint-free cloth.
Peel the backing paper from the new
decal starting at the edge
(be careful not to touch the decal adhesive).
Using a spray bottle
fi
lled with water, spray the
glue side of the decal before applying.
This will allow a bubble-and wrinkle-free application.
Wet the
fi
berglass with the spray bottle
and place the decal in position .
