phone: 1-800-854-3140 | 1-503-304-8899 fax: 1-800-366-7505 | 1-503-304-1899 www.jjamusements.com
3-31
Remove the pivot bushing.
Inspect the pivot bushing and drive shaft bushing for wear
(i.e. grooves, pitting and cracking). If any of these conditions
exist, it is recommended that the part be replaced.
The mount bushings do have a top and bottom.
Position the bushings’ thicker web to the top of the
motor and the thin web toward propeller.
USE A LIBERAL COATING OF MARINE-TYPE GREASE,
SUCH AS J&J CORROSION BLOCK # 99109, ON
THE WEAR SURFACES DURING REASSEMBLY.
NOTICE:
Index tabs of the insert bushing face
each other inside the pivot shield. These tabs align
NOTICE:
When installing Nylock nuts on the pivot,
MARINERS CHOICE NEVER SEEZ®
or equivalent
must be used to prevent corrosion and galling.
Thic
k w
eb
Bu
sh
in
g
Thin web
Thic
k w
eb
Thin web
