manualshive.com logo in svg

J&J Amusements 24v 1750 rpm, Service Manual, Page: 161 / 171

Share
Download
J&J Amusements 24v 1750 rpm Service Manual Download Page 161

Specifi cations and prices subject to change without notice. Download latest update to this manual on-line.

6-2

“Arrow” and “Blaster Boat” motor decal are 

located on the top of the motor cover.

(“Arrow decal” J&J #2-40-0001)

(“Blaster Boat decal” J&J #001687)

 

NOTE:

The arrow decal indicates forward direction the 

boat will travel when motor is activated.   

 “Blaster Boat” decal is located on 

each side of the motor cover.

(8” Blaster Boat decal” J&J #001686)

“Squirt” and “Go” decals are located on the 

motor cover next to the control rods.

(“Squirt decal” J&J #0097102)

(“Go decal” J&J #0097101)

 

NOTE:

These decals indicate the function of the control rods.

The blue rod activates the “squirt” function.

The green rod activates the motor “Go” function.

 

MOTOR COVER DECALS (elecric only)

KEEP YOUR BOATS LOOKING NEW WITH REPLACEMENT DECALS AVAILABLE AT J&J

DECALS - BUMPER BOAT - GENERAL

Part#

Description Price

0097101

 Decal, “GO” Button EBB 

 $2.13 

00981

 Decal, Gas & Brake 4.25” x 1” 

 $1.89 

00156

 Decal, “Stars & Stripes” 

 $13.92 

0097102

 Decal, “SQUIRT” Button EBB 

 $2.13 

2-40-0001

 Decal, Blaster Boat Motor Arrow 

 $4.74 

Summary of Contents for 24v 1750 rpm












































































































































































Reviews:

No comments