phone: 1-800-854-3140 | 1-503-304-8899 fax: 1-800-366-7505 | 1-503-304-1899 www.jjamusements.com
3-19
Bo
tto
m
The magnetic trigger is a high-quality, neodymium magnet housed in an injection-molded holder that is designed to be
“loose” when properly mounted, but not able to rotate because of the ears on the injection-molded part. The “down” side
must face toward the solid state switch. Use Anti-Seize when installing the shoulder bolt to the actuator rod(s).
NOTICE:
Early versions of this trigger did not have the ears molded into the trigger, allowing it to rotate upside down.
Mounting the magnet “up” side down will result in a poor or non-functioning sold state switch.
MAGNETIC TRIGGER (J&J# 2-30-0005)
General Information ...........................................................3-19
Magnetic Trigger ................................................................. 3-20
