Session Timeout
ONVIF User Authentication
To utilize ONVIF User Authentication, there must be at least one admin level user in the ONVIF service.
Note:
When in Enhanced Security mode, editing ONVIF User Authentication requires the admin account password.
Procedure 8-20 Enable/Disable ONVIF User Authentication
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select
Remote Access
from the
Security
menu.
The Remote Access tab displays.
3
Select the
ONVIF User Authentication
check box to enable ONVIF User Authentication.
OR
Deselect
ONVIF User Authentication
check box to disable ONVIF User Authentication.
The default setting is ‘Enabled’.
- End -
Session Timeout
Session timeout specifies the number of minutes that a web session can remain idle before it is automatically
terminated.
Procedure 8-21 Set a Session Timeout time
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select
Session Timeout
from the
Security
menu.
The Session Timeout tab displays.
3
Use the slider bar to select the
Session Timeout (mins)
.
The default setting is 15 minutes.
- End -
82
