Analog Video
You can select between 1 and 1000 milliseconds.
5
Select
OK
to save your changes.
- End -
Analog Video
An Analog Video Source can be selected from the drop down menu found in the Analog Video menu. Output
format of the analogue video can be managed by the dip switch located on the camera (default value) or via Web
User Interface page.
Available options are
DIP switch
,
PAL
,
NTSC
and
OFF
.
Note:
Once PAL or NTSC are selected via the Web User Interface- the physical DIP Switch selection on camera will be
obsolete.
Health Monitor
The Health Monitor function provides visibility on the health status of popular device parameters. Each parameter
can be enabled or disabled. The refresh frequency of the health monitor can be determined by selecting a duration
from the Reporting Period drop-down menu.
Procedure 10-13 Configure Health Monitor Settings
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select the
Health Monitor
from the
System
menu.
3
Select the
Recording Period
from the drop-down menu.
4
Select the corresponding checkbox to enable health monitoring on a parameter.
OR
De-select the corresponding checkbox to disable health monitoring on a parameter.
The default setting for all parameters is Enabled.
- End -
Logs
Information is provided on system and boot logs created by the camera.
100
