IEEE 802.1x
You will be prompted to confirm that you would like to upload the HTTPS certificate.
6
Select
OK
to confirm the upload.
OR
Select
Cancel
.
- End -
Delete a HTTPS Certificate
If you delete the existing certificate it will be replaced by a temporary substitute. The current browser session will
be lost and you will be required to log back in to the camera Web User Interface.
Procedure 8-12 Delete a HTTPS Certificate
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select
HTTP/HTTPS
from the
Security
menu.
3
Select
Delete
.
The camera will display a “Restarting HTTPS Service” page with a progress bar showing the deletion
progress.
4
When complete the camera will return to the log in page.
- End -
IEEE 802.1x
The IEEE 802.1x security feature provides port based network access control i.e. securing corporate networks
from the attachment of unauthorized devices.
Authentication is carried out through use of the Extensible Authentication Protocol or EAP. Both PEAP and TLS
methods are supported.
Procedure 8-13 Configure IEEE 802.1x Security
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select
IEEE 802.1x
from the
Security
menu.
The General tab is displayed.
3
Select the
Enable IEEE802.1x
checkbox to enable IEEE802.1x security .
OR
4
De-select the
Enable IEEE802.1x
checkbox to disable IEEE802.1x security.
5
Select the
EAPOL Version
from the drop-down menu.
6
Select the
EAP Method
using the radio buttons.
7
Enter the EAP identity name in the
EAP Identify
textbox.
77
