Picture Settings
Picture Settings
Picture Basic
Adjust the Picture Rotation, Focus / Zoom, Exposure and White Balance settings.
Picture Rotation
Configure the orientation and corridor mode settings. Both settings are optional.
Procedure 4-2 Configure Orientation Settings
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select the
Picture Basic
tab from the
Video
menu.
3
Select the required
Orientation
setting:
•
Mirror
•
Flip
The video pane will update to display the new settings.
Note:
When wall mounting the camera you should select Flip to correct the lens orientation.
- End -
Focus / Zoom
The Focus is manually configured on initial setup. The
One Touch
button can be used to automatically focus the
area of view highlighted in the yellow outlined box displayed on the video pane. This box can be moved and
resized as required and subsequent manual adjustments can be applied if required using the plus and minus
values. The plus and minus arrows are used to manually fine tune the image.
The Zoom slider bar is used to manually zoom in and out to manually configure to picture.
When IR Compensate is enabled, the camera refocuses within 30 seconds of the mode transisition between day
to night mode and night to day mode.
Procedure 4-3 Adjust Camera Focus / Zoom
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select the
Picture Basic
tab from the
Basic Configuration
menu.
3
Select
to start the video stream if it is not already active.
34
