Picture Basic
The video pane will update to display the new settings.
- End -
Procedure 3-9 Adjust Camera Focus using OneTouch Autofocus
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select the
Picture Basic
tab from the
Basic Configuration
menu.
3
Select
to start the video stream if it is not already active.
4
Draw a region around the area to be focused on within the image.
5
Select the
One Touch
button.
The camera refocuses to the optimal zoom level for the image.
The video pane will update to display the new settings.
- End -
Procedure 3-10 Enable/Disable IR Compensate
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select the
Picture Basic
tab from the
Basic Configuration
menu.
3
Select the IR compensate check box to enable IR compensation
OR
Clear the IR compensate check box to disable IR compensation.
- End -
Exposure
Configure the exposure settings for the camera.
Procedure 3-11 Configure Exposure Settings
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select the
Picture Settings
tab from the
Basic Configuration
menu.
3
Select
to start the video stream if it is not already active.
4
Select the
Exposure Method
from the drop-down menu:
•
Full Picture Weighted
- exposure calculations are based on the entire image.
•
Center Weighted
- exposure calculations are based on a region around the center of the
image.
•
Spot
- exposure calculations are based on the very center of the image.
21
