Set-up
Finish set-up
7-27
For "Disabled" (default) the controllere only transmits the standard diagnosis. An AS-i error state has
no direct effect on the Profibus DP but must then be monitored otherwise by the PLC (using the bits
4..7 in the first byte or via the command channel).
Byte 37
Bit 4 = TRUE
7.5 Finish
set-up
System behaviour
►
Define the system behaviour in the fieldbus configuration program, e.g.
watchdog etc.
►
Save the configuration
►
Transfer the configuration to the DP master
Start
►
Start the DP master
If there is communication on the fieldbus:
> The menu [Fieldbus Setup] in the controllere successively shows the
settings configured in the DP master.
If watchdog activated:
> LED [Bus Failure] goes out.
Summary of Contents for Ecomat 300 AC1355
