IFM Ecomat 300 AC1355, Supplementary Device Manual

Page: 81 / 248

DP module 12: Extended command channel
Error codes in the module 12
9-5
9.3 Error codes in the module 12
Value [hex] Description
01
no slave response or:
master is in the offline mode when calling the command
02 no slave with the old address found
03 slave with address 0 connected
04 no slave with the new address found
05 error when deleting the old address
06 error when reading the IO configuration
07 error when writing the new address or the extended ID code 1
08 new address could only be saved temporarily
09 extended ID code 1 could only be saved temporarily
0A slave is not in LAS
0B parameter or address invalid
0C faulty S-7.4 protocol sequence
0D S-7.4 protocol aborted (timeout)
0E invalid AS-i slave address for the S-7.4 protocol (e.g. B slaves)
0F AS-i slave has completed the S-7.4 string
10 AS-i S-7.4 no longer connected (no longer in LAS)
11 another S-7.4 transfer to the addressed AS-i slave is already active
12 the previous segmented S-7.4 transfer was not completed
13 invalid S-7.4 data length
14
master is in the wrong operating mode or
invalid S-7.4 command
16 timeout during command processing
17 wrong slave profile or
slave not in LAS
master is not in the normal mode
20 the command could not be processed within the specified time
E0...EF error detected by AS-i slave; note error code CTT2 (see below)
F0 invalid CTT2 command
F1 invalid CTT2 response
F2 7.5 data length longer than 30 bytes
9.4 CTT2 error code in module 12
Value [hex] Description
00 no error
01 invalid index
02 invalid length
03 command not implemented
04 occupied, command could not be completed in the specified time
05 command was not acknowledged