IBM TotalStorage SAN140M, Installation And Service Manual

Page: 97 / 428

65 Chapter 2: Installation tasks
Figure 33
Date/time properties dialog box (Date & Time tab)
Task 10: Configure the call-home feature (optional)
The management server has an optional call-home feature that
provides automatic dial-out through the internal modem to a service
support facility to report director problems. The problem is logged
into the support facility tracking system for resolution.
NOTE: These steps are valid only for an initial installation. Several dialog
boxes appearing in this procedure are configured only once per installation.
To configure the call-home feature:
1. There are two jacks on the server internal modem: one for the
call-home connection (LINE), and the other for a telephone
(PHONE). Ensure a telephone cable is routed and connected to
the LINE jack at the rear of the management server.
2. At the Windows desktop, double-click the Call Home Configuration
icon. The Call Home Configuration dialog box displays.
3. At the Call Center Phone Number field, enter the telephone number
for IBM technical support. Include necessary information, such as
the country code, area code, or any prefix required to access a
telephone line outside the facility.
i24M1
1
6
4