IBM TotalStorage SAN140M, Installation And Service Manual

Page: 374 / 428

SAN140M Installation and Service Manual 342
— Call-home settings.
— Configuration data for each managed director (stored on the
server and in NV-RAM on each director or switch).
• Windows 2000 configuration information - Windows 2000
network addresses, date and time information, user information,
and the product identification are recorded during installation of
the management server.
Restore management server procedure
To restore the management server:
1. At the server, press the left edge (PUSH label) of the LCD panel to
disengage the panel and expose the CD-RW drive.
2. Insert the Management Server Restore CD-ROM in the CD-RW
drive and close the LCD panel.
ATTENTION! This procedure deletes all data from the C: hard drive
partition.
3. Press the power button. The server powers on and performs a
restore from the CD-ROM.
4. After the restore completes, the server makes a series of beeps.
Remove the Management Server Restore CD-ROM from the CD-RW
drive.
5. Power cycle the server. The server performs power-on self-tests
(POSTs). After successful POST completion, the LCD panel
displays a Welcome!! message, then cycles through and displays
server operational information.
6. Configure the following parameters at the server LCD panel ( Task
5: Configure director network information (optional) on page 51).
• LCD panel password.
• IP address for private and public LAN connections.
• Subnet mask or private and public LAN connections.
7. Log on to the server Windows 2000 desktop through a LAN
connection to a browser-capable PC.