IBM TotalStorage SAN140M, Installation And Service Manual

Page: 163 / 428

131 Chapter 3: Maintenance analysis procedures (MAPS)
5
A connection is not allowed because of a conflict with the configured
port type. An expansion port (E_Port) is cabled to a Fibre Channel
device or a fabric port (F_Port) is cabled to a director or fabric switch.
a. For the product reporting the problem:
— EFCM Basic Edition - Select
Ports
and
Basic Info
from the
Configure menu at any view. The Basic Information View
displays.
— Element Manager - Select Ports from the Configure menu
at any view. The Configure Ports dialog box displays.
b. If necessary, use the vertical scroll bar to display the information
row for the port indicating an invalid attachment.
c. Select (click) the Type field and configure the port as follows:
• Select fabric port (F_Port) if the port is cabled to a device.
• Select expansion port (E_Port) if the port is cabled to a
director or switch (ISL).
d. Click OK or Activate.
e. Was the maintenance action successful?
NO YES
↓
The product port is operational. Exit MAP.
Contact the next level of support. Exit MAP.
6
An ISL connection is not allowed because one of the following
mode-mismatch conditions was detected:
• The product is configured to operate in Open Fabric 1.0 mode
and is connected to a fabric element not configured to Open
Fabric 1.0
mode.
• The product is configured to operate in Open Fabric 1.0 mode
and is connected to a legacy IBM switch at the incorrect
exchange link parameter (ELP) revision level.
• The product is configured to operate in Open Fabric 1.0 mode
and is connected to a non-IBM switch at the incorrect ELP
revision level.
• The product is configured to operate in McDATA Fabric 1.0
mode and is connected to a non-IBM switch.