IBM TotalStorage SAN140M, Installation And Service Manual

Page: 152 / 428

SAN140M Installation and Service Manual 120
19
Determine the IP address of the management server running the first
instance of the SAN management application.
a. After the server powers on and successfully completes POSTs,
the LCD panel displays a Welcome!! message and continuously
cycles through and displays operational information.
b. After a few seconds, the LCD panel displays a LAN 2:
010.001.001.001 message.
c. Depending on product-to-server LAN connectivity, record the
appropriate IP address (LAN 1 or LAN 2).
Continue.
20
Configure the management server reporting the Duplicate Session
problem as a client.
a. At the SAN management application, select Logout from the
SAN menu. The application closes and the Log In dialog box
displays.
b. Type the user ID and password obtained in MAP 0000: Start
MAP .
c. Type the IP address of the management server running the first
instance of the SAN management application in the Network
Address field.
d. Click Login. The application opens and the main window
displays.
Was the maintenance action successful?
NO YES
↓
The management server connection is restored and the
second management server is a client. Exit MAP.
Contact the next level of support. Exit MAP.
21
The IP address defining the product to the SAN management
application is incorrect or unknown and must be verified. An
asynchronous RS-232 modem cable and maintenance terminal
(desktop or notebook PC) with a Windows-based operating system
and RS-232 serial communication software (such as ProComm Plus or
HyperTerminal) are required. To verify the IP address: