IBM TotalStorage SAN140M, Installation And Service Manual

Page: 164 / 428

SAN140M Installation and Service Manual 132
Reconfigure the operating mode:
a. Set the product offline ( Setting the director online or offline on
page 190).
b. For the product reporting the problem:
— EFCM Basic Edition - Select Switch and Fabric Parameters
from the
Configure
menu at any view. The
Fabric
Parameters View displays.
— Element Manager - Select Operating Parameters and
Fabric Parameters from the Configure menu at any view.
The
Configure Fabric Parameters
dialog box displays.
c. Select McDATA Fabric 1.0 or Open Fabric 1.0 from the Interop
Mode drop-down list.
— Select McDATA Fabric 1.0 if the product is attached
only
to
other IBM directors or switches operating in McDATA Fabric
1.0 mode.
— Select Open Fabric 1.0 if the product is attached to
directors or switches produced by open-fabric compliant
original equipment manufacturers (OEMs).
d. Click OK or Activate.
Was the maintenance action successful?
NO YES
↓
The product port is operational. Exit MAP.
Contact the next level of support. Exit MAP.
7
A loopback (wrap) plug is connected to the port with no diagnostic
running. Remove the plug from the port receptacle. If directed by the
customer, connect a fiber-optic jumper cable attaching a device to the
product.
• If the port is operational with no device attached, both LEDs
adjacent to the port turn off and the port state is No Light.
• If the port is operational with a device attached, the blue/green
LED turns on, the amber LED turns off, and the port state is
Online.
Was the maintenance action successful?
NO YES
↓
The product port is operational. Exit MAP.