IBM TotalStorage SAN140M, Installation And Service Manual

Page: 56 / 428

SAN140M Installation and Service Manual 24
Installation task summary
The service representative installation responsibilities include the
following:
• Installing the director in a rack (if the director did not arrive in a
rack)
• Connection power cords.
• Powering up the director.
• Changing the IP address to the customer-requested values.
• Preparing the director for the customer or some consultant to
configure.
IBM does not install the EFCM Basic program, install the
management server, or configure the machine for use.
Table 4 summarizes the installation tasks for the director and optional
Ethernet hub. The table describes each task, states whether the task is
optional, and lists the page reference.
Table 4
Installation Task summary
Task number and description Required or optional Page
Task 1: Verify installation requirements Required. 26
Task 2: Unpack, inspect, and install the Ethernet hub
(optional) Optional - perform task if hub is required to connect
director and management interface. 26
Task 3: Unpack, inspect, and install the director
Required. 30
Task 4: Configure director at the EFCM Basic Edition
interface (optional)
Optional - perform task if director is managed through
the EFCM Basic Edition interface. 33
Task 5: Configure director network information (optional) Configure if connecting multiple directors or connecting
director and management server to a public LAN. 51
Task 6: Configure server password and network addresses Required if management server is used. 55
Task 7: Configure management server information Required if management server is used. 57
Task 8: Configure Windows operating system users Required if management server is used. 61
Task 9: Set management server date and time Required if management server is used. 63
Task 10: Configure the call-home feature (optional) Optional - configure if specified by customer and
telephone connection is provided. 65