IBM TotalStorage SAN140M, Installation And Service Manual

Page: 162 / 428

SAN140M Installation and Service Manual 130
Was the maintenance action successful?
NO YES
↓
The product port is operational. Exit MAP.
Contact the next level of support. Exit MAP.
4
A port has an invalid attachment.
a. At the Event Log, examine the first five bytes of event data.
b. Byte 0 specifies the port reporting the problem. Byte 4 specifies
the invalid attachment reason ( Table 16 ).
Table 16 Invalid attachment reasons and actions
Byte 4 Invalid attachment reason Action
01 Unknown Contact the next level
of support.
02 ISL connection not allowed. Go to step 5 .
03, 04 Incompatible switch. Go to step 6 .
05 Loopback plug connected. Go to step 7 .
06 N-Port connection not allowed. Go to step 5 .
07 Non-IBM switch at other end. Go to step 6 .
08 E_Port capability disabled. Go to step 8 .
0A Unauthorized port binding WWN. Go to step 3 .
0B Unresponsive node. Go to step 9 .
0C ESA security mismatch. Go to step 11 .
0D Fabric binding mismatch. Go to step 12 .
0E Authorization failure reject. Go to step 9 .
0F Unauthorized switch binding WWN. Go to step 11 .
10 Authentication failure Go to step 13 .
11 Fabric mode mismatch. Go to step 6 .