IBM TotalStorage SAN140M, Installation And Service Manual

Page: 72 / 428

SAN140M Installation and Service Manual 40
Figure 20
Network view
a. At the IP Address field, type the new value (default is
10.1.1.10 ).
b. At the Subnet Mask field, type the new value (default is
255.0.0.0 ).
c. At the Gateway Address field, type the new value (default is
0.0.0.0 ).
2. Click OK to save and activate changes. An acknowledgement
message displays, indicating the browser PC must be directed to
the new IP address.
3. Update the address resolution protocol (ARP) table for the
browser PC.
a. Close the EFCM Basic Edition interface and all browser
applications.
b. At the Windows desktop, click Start at the left side of the task
bar. The Windows Workstation menu displays.
c. At the Windows Workstation menu, sequentially select the
Programs and Command Prompt options. A disk operating
system (DOS) window displays.
d. Delete the director old IP address from the ARP table. At the
command (C:\) prompt, type arp -d xxx.xxx.xxx.xxx, where
xxx.xxx.xxx.xxx
is the old IP address for the director.
i24M1
1
33