IBM TotalStorage SAN140M, Installation And Service Manual

Page: 166 / 428

SAN140M Installation and Service Manual 134
• EFCM Basic Edition - Refer to the EFCM Basic Edition User
Manual (620-000240) for instructions.
• Element Manager - Refer to the Element Manager User Manual
(620-000153).
Was the maintenance action successful?
NO YES
↓
The product port is operational. Exit MAP.
Contact the next level of support. Exit MAP.
12
A connection is not allowed because of a fabric binding mismatch.
Fabric membership lists must be compatible for both elements. At the
EFCM Basic Edition interface or SAN management application,
ensure fabric binding is enabled and fabric membership lists are
compatible for both elements.
• EFCM Basic Edition - Refer to the EFCM Basic Edition User
Manual (620-000240) for instructions.
• SAN management application - Refer to the EFC Manager
Software Release 9.0 User Manual (620-000170) for instructions.
Was the maintenance action successful?
NO YES
↓
The product port is operational. Exit MAP.
Contact the next level of support. Exit MAP.
13
A connection is not allowed because of a SANtegrity authentication
failure. At the EFCM Basic Edition interface or Element Manager,
modify the IP address access control list, product-level authentication
settings, port-level authentication settings, and challenge handshake
authentication protocol (CHAP) sequence to ensure device access to
the product.
• EFCM Basic Edition - Refer to the EFCM Basic Edition User
Manual (620-000240).
• Element Manager - Refer to the Element Manager User Manual
(620-000153).
Was the maintenance action successful?