IBM TotalStorage SAN140M, Installation And Service Manual

Page: 118 / 428

SAN140M Installation and Service Manual 86
12. Click OK to save the information and close the dialog box.
13. Maximize the Element Manager application.
14. Select Enable E-Mail Notification from the Maintenance menu at any
view. A check mark appears to indicate e-mail notification for the
product is enabled.
NOTE: The enable function must be activated for each product through
the Element Manager application.
Configure and enable Ethernet events
Perform this procedure to configure and enable Ethernet events. An
Ethernet event is recorded (after a user-specified time interval) when
the director-to-management server communication link drops. To
configure and enable Ethernet events:
1. Minimize the Element Manager application and return to the
SAN management application.
2. At the EFCM main window, select Ethernet Event from the Monitor
menu. The Configure Ethernet Events dialog box displays.
3. Click the Enable Ethernet Events check box. A check mark appears
to indicate Ethernet events are enabled.
4. At the Ethernet Timeout field, type a value between 10 through 120
minutes.
5. Click OK to close the dialog box.
Configure, enable, and test call-home event notification
Telephone numbers and other information for the call-home feature
are configured through the Windows dial-up networking application
(
Task 10: Configure the call-home feature (optional) on page 65). To
configure, enable, and test call-home event notification:
1. Minimize the Element Manager application and return to the
SAN management application.
2. At the EFCM main window, select Event Notification and Call
Home from the Monitor menu. The Call Home Event Notification
Setup dialog box displays.