IBM TotalStorage SAN140M, Installation And Service Manual

Page: 231 / 428

199 Chapter 4: Repair information
6. When the process completes, the message "Firmware
successfully received and verified. Your browser connection
will be unavailable until unit restart is complete"
displays.
7. After verification, the director performs an IPL that takes
approximately 30 seconds. During the IPL, the
browser-to-director Internet connection drops momentarily and
the EFCM Basic Edition session is lost.
8. After the director IPL and EFCM Basic Edition session logout, the
message "Firmware upgrade complete. Click here to login"
displays.
9. Click here to login to the director and start a new EFCM Basic
Edition session. The Enter Network Password dialog box displays.
10. Type the default user name and password.
NOTE: The default user name is Administrator and the default
password is password. The user name and password are case-sensitive.
11. Click OK. The EFCM Basic Edition interface opens with the
Hardware View panel displayed.
Install or upgrade software
The SAN management application (software) shipped with the
product is provided on the EFC Management Applications CD-ROM.
Subsequent (upgrade) software versions are provided to customers
through IBM.
NOTE:
When upgrading firmware or software, follow all procedural
information contained in release notes or engineering change (EC)
instructions that accompany the version. Such information supplements
information provided in this general procedure.
To install or upgrade the SAN management application:
1. At the server, close and exit all applications, then perform one of
the following:
— Insert the EFC Management Applications CD-ROM into the
CD-ROM drive of the management server.