IBM TotalStorage SAN140M, Installation And Service Manual

Page: 105 / 428

73 Chapter 2: Installation tasks
Task 17: Set director date and time
Log entries are stamped with the date and time received from the
director. To set the effective date and time for the director:
1. Select Date/Time from the Configure menu at any view. The
Configure Date and Time dialog box displays ( Figure 37 ).
Date and time can be set manually, or set to be periodically
updated by the SAN management application (the director and
application synchronize at least once daily).
Figure 37
Configure date and time dialog box
2. To set date and time manually:
a. Click the Periodic Date/Time Synchronization check box to
deselect the option (no check mark). The greyed out Date and
Time fields activate.
b. Click the Date fields that require change, and type numbers in
the following ranges:
• Month (MM): 1 through 12.
• Day (DD): 1 through 31.
• Year (YYYY): greater than 1980.
c. Click the Time fields that require change, and type numbers in
the following ranges:
• Hour (HH): 0 through 23.
• Minute (MM): 0 through 59.
4
M1
1
68