IBM TotalStorage SAN140M, Installation And Service Manual

Page: 103 / 428

71 Chapter 2: Installation tasks
During the grace period, a No Feature Key dialog box appears
when the Element Manager application opens. Click OK to close
the dialog box and use the application. In addition, the message
Element Manager license key has not been installed - Please
follow up instructions to update permanent key
appears
splashed across all views.
• Full volatility - This feature ensures no Fibre Channel frames are
stored after the product is powered off or fails, and a memory
dump file (that possibly includes classified data frames) is not
included as part of the data collection procedure.
• N_Port ID virtualization - This feature allows up to 256 Fibre
Channel addresses to be assigned to an N_Port.
• OpenTrunking - This feature provides dynamic load balancing of
Fibre Channel traffic across multiple ISLs.
• SANtegrity authentication - This feature enhances security in
SANs by restricting access to Fibre Channel elements (directors or
fabric switches).
• SANtegrity binding - This feature enhances security in SANs
with a large and mixed group of fabrics and attached devices.
After purchasing a feature, obtain the PFE key by following the
enclosed instructions. The key is an alphanumeric string consisting of
uppercase and lowercase characters that must be entered exactly,
including dashes. An example format is:
XxXx-XXxX-xxXX-xX.
Keys are encoded to work only with the serial number of the installed
product. Record the key to re-install the feature if required. If the
product fails and is replaced, obtain new PFE keys from IBM. Have
the serial numbers of the failed and replacement products, and the
old PFE key number or transaction code. After obtaining a PFE key,
install the feature as follows:
1. Select Features from the Configure menu at any view. The Configure
Feature Key dialog box displays.
2. Click New. The New Feature Key dialog box displays ( Figure 36 ).