Installing or Removing a Drive in the Half-Height Drive
Space
This section describes the procedures for installing or removing a
drive in the half-height drive space.
Installing a Drive
To install a drive in the half-height drive space, do the following:
1
Remove the top cover
1
.
2
Remove the three screws attaching the half-height drive tray to
the half-height drive space
2
.
3
Pull up the tray from the half-height drive space
3
.
4
Make sure the front side of the tray is positioned in the front,
and screw the drive into the tray.
5
Attach the tray containing the drive to the half-height drive space
by driving in the screws.
Cable Connectors
If cable connectors are fastened together with a twist-tie,
undo the twist-tie and separate them.
Go to the applicable step.
Chapter 3. Installing and Removing Options
49
Summary of Contents for SelectaDock II
