IBM SelectaDock II, User Manual, Page: 56 / 168

Installing or Removing a Drive in the 1-Inch-High Drive
Space
This section describes the procedures for installing or removing a
drive in the 1-inch-high drive space.
Removing the UltraBay Tray
To use the 1-inch-high drive, you must first remove the UltraBay tray
from your docking station. To remove the UltraBay tray, do the
following:
1
Unlock the UltraBay lock knob at the back of the UltraBay by
pressing down the lock
1
. If you don't need to secure the
UltraBay tray, twist the lock
2
.
2
Pull out the cables connecting the docking station to the
UltraBay from the connectors.
3
Pull out the UltraBay tray until it stops.
4
Release the latch fastening the UltraBay tray to the docking
station.
44
IBM ThinkPad SelectaDock II User's Guide