IBM SelectaDock II, User Manual

Page: 134 / 168

Follow the instructions on the screen if you want to copy the files
to a different directory or control the changes to your
configuration files.
The last EZ-SCSI screen has three buttons:
Click on Reboot to restart your computer and activate the newly
installed EZ-SCSI device drivers.
Click on Return to Windows to exit EZ-SCSI and keep working in
Windows without restarting your computer. You must restart your
computer later to activate the new configuration.
Click on View README to view the information in the
README.TXT file.
When you return to Windows before or after restarting your computer,
you will see the Adaptec SCSI group, which contains icons for several
EZ-SCSI applications and informational files.
Installing EZ-SCSI for DOS
The DOS version of EZ-SCSI gives your computer access to the
Adaptec SCSI device drivers and ASPI managers. It also includes
several formatting utilities and an audio CD-Player application.
Note
Adaptec EZ-SCSI for DOS does not install any Windows
applications, nor does it install ASPI for Windows. If Microsoft
Windows 3.1 is installed on your computer, follow the instructions
in “Installing EZ-SCSI for Windows” on page 121.
Dock your computer; then follow these steps to install Adaptec
EZ-SCSI for DOS:
1
Insert the SelectaDock option diskette into the diskette drive on
your computer.
2
At the DOS prompt, change to the drive letter where you
inserted the diskette (either A or B).
122
IBM ThinkPad SelectaDock II User's Guide