IBM SelectaDock II, User Manual

Page: 117 / 168

Adapter Problems
Problem Action
The adapter does not
work. Verify that:
1. The adapter is designed for the docking station adapter
slot.
2. You followed all the installation instructions described in
“Installing or Removing the PCI/ISA Adapter Card” on
page 54.
3. The system resources are assigned correctly by its utility
program, if the adapter card is a non-PnP ISA adapter bus
type.
4. The driver disk is up to date. Contact the driver
manufacturer. The accompanying disk may support only
older desktop computers.
See the adapter documentation that came with the option to
diagnose problems.
Intermittent Problems
Problem Action
An intermittent problem
occurs. The problem can be difficult to analyze because it occurs just
once in a while. If your docking station has such a problem,
verify that:
1. The computer is firmly attached to the docking station.
2. All cables and power cords are securely connected to the
SelectaDock system and to the attached options.
3. The SCSI device is correctly terminated.
If these items are correct and the problem still occurs, write
down what the problem is and what the system was doing
when the problem occurs. Then contact your place of
purchase or service representative for help.
Chapter 7. Solving Problems
105