IBM SelectaDock II, User Manual

Page: 44 / 168

Note: If the system is not suspended, you can undock by using
either the
UNDOCK2
command or the Docking Control
program without first turning the security key.
3
Do one the following:
For Windows, the Docking Control program pops up a dialog
box. Press the Eject button.
For DOS, at a DOS command prompt, type:
C:\THINKPAD\UNDOCK2
and press Enter.
4
The system enters suspend mode and you will hear two
consecutive beep sounds. Turn the security key again to eject
the computer.
This completes hot or warm undocking.
Limitation for Hot or Warm Docking and Undocking for DOS or
Windows 3.1
If you are using DOS or Windows 3.1, hot or warm docking and
undocking are not supported when a SCSI driver included in the
option diskette is loaded or when an IDE hard disk drive is installed.
32
IBM ThinkPad SelectaDock II User's Guide