IBM SelectaDock II, User Manual

Page: 147 / 168

As you create partitions, AFDISK displays them in the upper
right of the panel, as shown in the following figure:
Select SCSI Device to Partition
HA #0 - Target 0
HA #0 - Target 4 QUANTUM LP105S 910109405
IOMEGA BETA90
<Ins> Create, <Del> Delete, <F1> Help, <Esc> Exit
Adaptec SCSI Disk Setup Program v3.32
Logical Drive Info
64
32
85
512
85
head
sectors/track
cylinders
bytes/sector
megabytes
2AEEFh blocks
Type Start End Megs
DOS 0 84 85
7
Press Esc to return to the Select SCSI Device to Partition
window. If you want to format a different disk drive or create
partitions on it, select the device from the list.
8
To quit AFDISK, press Esc and select Yes when you are asked
if you want to quit.
If you have changed the disk partitions, a message reminds you that
you must restart your computer before you can access the newly
created partitions.
Note: If you add or delete disk partitions, you must reinstall EZ-SCSI
to update the system configuration.
Appendix B. Using the SCSI Support Software
135