IBM SelectaDock II, User Manual

Page: 43 / 168

The docking station power turns on automatically. You will hear
a beep (if the beep is not disabled). The Attention indicator
blinks.
6
Do the following to proceed with hot docking:
For Windows 3.1:
The Docking Control pops up a dialog box for selection.
Press the Full-Dock button to go to Fully docked. If you
want to continue in PassThru mode, press the PassThru
button.
For DOS:
At the DOS command prompt, type:
C:\THINKPAD\DOCK2
and press Enter.
If you want to continue in PassThru mode, type:
C:\THINKPAD\DOCK2 /P
and press Enter.
Note: In these examples, the program is on the C drive.
This completes hot or warm docking.
Undocking
To use hot or warm undocking for DOS or Windows 3.1, do the
following:
1
Close all application programs that are opening the files on the
hard disk drives attached to the SelectaDock system or are
using devices that will be detached.
2
For Windows 3.1, double-click on the Docking Control icon, or
turn the security key to the eject position.
For DOS, turn the security key to the eject position.
This action activates an eject request signal to your computer,
and the computer sounds a beep if the beep is not disabled. It
resumes if it has been in suspend mode.
Chapter 2. Using the SelectaDock System
31