![background image](http://html1.mh-extra.com/html/ibm/selectadock-ii/selectadock-ii_user-manual_3330587032.webp)
6
Place the SelectaDock base in the docking station, aligning the
guides to the slits on the SelectaDock base while keeping a gap
2
of about 12 mm (0.5 in.). In this illustration, place the
SelectaDock base in the docking station so that the triangle on
the docking station faces the upper (white) triangle on the
SelectaDock base. Make sure that the SelectaDock base is fully
seated and that there is no side-to-side movement within the
docking station
7
Slide the SelectaDock base
3
forward carefully until it is fully
inserted. In this illustration, slide the base until its lower (black)
triangle faces the triangle on the docking station.
8
Raise the SelectaDock base lock
4
until it latches. This lock
plate fastens the right side of the SelectaDock base.
20
IBM ThinkPad SelectaDock II User's Guide
Summary of Contents for SelectaDock II
